Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis     

Ramin Pakzad  Shanyong Wang  Scott W. Sloan 《国际地质力学数值与分析法杂志》2020,44(10):1472-1494

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.  相似文献   

Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials          下载免费PDF全文

Chao Jiang  Gao‐Feng Zhao 《国际地质力学数值与分析法杂志》2018,42(4):674-693

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.  相似文献   

Analytical study of ground motion caused by seismic wave propagation across faulted rock masses          下载免费PDF全文

J.C. Li  N.N. Li  S.B. Chai  H.B. Li 《国际地质力学数值与分析法杂志》2018,42(1):95-109

Studying seismic wave propagation across rock masses and the induced ground motion is an important topic, which receives considerable attention in design and construction of underground cavern/tunnel constructions and mining activities. The current study investigates wave propagation across a rock mass with one fault and the induced ground motion using a recursive approach. The rocks beside the fault are assumed as viscoelastic media with seismic quality factors, Q_p and Q_s. Two kinds of interactions between stress waves and a discontinuity and between stress waves and a free surface are analyzed, respectively. As the result of the wave superposition, the mathematical expressions for induced ground vibration are deduced. The proposed approach is then compared with the existing analysis for special cases. Finally, parametric studies are carried out, which includes the influences of fault stiffness, incident angle, and frequency of incident waves on the peak particle velocities of the ground motions.  相似文献   

初轨计算中的病态分析   总被引：5，自引：0，他引：5  

吴连大  贾沛璋 《天文学报》1997,38(3):288-296

本文对现有初轨计算方法进行病态性分析与误差分析；研究结果表明：病态对现有初轨算法的影响，主要来源于法方程系数中包含观测误差．系数行列式愈大，定轨精度的损失愈多，当■被随机误差项△μ淹盖时，现有初轨算法将失效．此外，仿真结果还显示：■与△μ的大小还极大地依赖观测弧段的空间位置，当观测弧段包含近站点作为中点时，■最大，而■小，此时定轨精度较高；当观测弧段位于近站点的某一侧时，■小，而■大，此时定轨精度较低，观测弧段愈偏离近站点，病态影响愈大；因而在观测时，应尽量使观测弧段与近站点对称（此时μ值较大），这是提高短弧定轨的一种有效途径．  相似文献   

关于改进的Encke方法中参考轨道的选择和校正     

刘林  胡松杰 《天文学报》1996,37(3):285-293

对于改进的Ｅｎｃｋｅ方法，选择适当的参考轨道是一个关键．然而，对于人造地球卫星长弧轨道计算，目前所给出的几种参考轨道均需要逐段校正，这将给定轨问题带来附加的复杂性．本文将仔细探讨如何选择参考轨道和减少校正次数．  相似文献   

P‐wave transmission across fractures with nonlinear deformational behaviour     

X. B. Zhao  J. Zhao  J. G. Cai 《国际地质力学数值与分析法杂志》2006,30(11):1097-1112

Stress wave attenuation across fractured rock masses is a great concern of underground structure safety. When the wave amplitude is large, fractures experience nonlinear deformation during the wave propagation. This paper presents a study on normal transmission of P‐wave across parallel fractures with nonlinear deformational behaviour (static Barton–Bandis model). The results show that the magnitude of transmission coefficient is a function of incident wave amplitude, nondimensional fracture spacing and number of fractures. Two important indices of nondimensional fracture spacing are identified, and they divide the area of nondimensional fracture spacing into three parts (individual fracture area, transition area and small spacing area). In the different areas, the magnitude of transmission coefficient has different trends with nondimensional fracture spacing and number of fractures. In addition, the study reveals that under some circumstances, the magnitude of transmission coefficient increases with increasing number of fractures, and is larger than 1. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

小波分析理论在GPS技术中的应用     

ZHENG Zuoya HUANG Cheng LU Xiushan 《中国科学院上海天文台年刊》2003,(1)

在GPS数据处理中 ,存在着误差影响、影响波的干扰、周跳和数据量大等问题。误差影响和影响波的干扰实质是在接收卫星信号时受到其它因素的影响 ;周跳是由于卫星信号的失锁而造成信号的不连续 ;数据量大是因为GPS观测需要采样间隔小又连续观测所致。由于小波理论具有时频分析、波形分解、特征提取和快速小波变换等特性 ,应用小波变换和波形分解可以解决误差影响和影响波的干扰的问题 ;应用特征提取可以解决周跳检测问题 ;应用快速小波变换可进行数据压缩  相似文献   

Plane of elastic non-resisting tension material under foundation structures     

A. Baratta  I. Corbi 《国际地质力学数值与分析法杂志》2004,28(6):531-542

In the frame of 2D-static problems one approaches the problem of elastic-NRT (not-resisting tension) semi-plane loaded on its limit line. This problem is intended to model the stress situation induced in the soil by a foundation structure. The solution, in terms of activated stress field, is searched for in the class of stress fields satisfying equilibrium and admissibility conditions, by applying an energy approach. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

The response of an elastic half‐space under a momentary shear line impulse     

Moche Ziv 《国际地质力学数值与分析法杂志》2003,27(3):207-232

The response of an ideal elastic half‐space to a line‐concentrated impulsive vector shear force applied momentarily is obtained by an analytical–numerical computational method based on the theory of characteristics in conjunction with kinematical relations derived across surfaces of strong discontinuities. The shear force is concentrated along an infinite line, drawn on the surface of the half‐space, while being normal to that line as well as to the axis of symmetry of the half‐space. An exact loading model is introduced and built into the computational method for this shear force. With this model, a compatibility exists among the prescribed applied force, the geometric decay of the shear stress component at the precursor shear wave, and the boundary conditions of the half‐space; in this sense, the source configuration is exact. For the transient boundary‐value problem described above, a wave characteristics formulation is presented, where its differential equations are extended to allow for strong discontinuities which occur in the material motion of the half‐space. A numerical integration of these extended differential equations is then carried out in a three‐dimensional spatiotemporal wavegrid formed by the Cartesian bicharacteristic curves of the wave characteristics formulation. This work is devoted to the construction of the computational method and to the concepts involved therein, whereas the interpretation of the resultant transient deformation of the half‐space is presented in a subsequent paper. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

格网DEM中基于坡度信息的粗差检测与剔除方法试验     

韩玲 《地球科学与环境学报》2003,25(1):74-75

提出了一种基于格网DEM的粗差检测及剔除方法,其基本思想是对每个表面上的点,在坡度上,高程或突变量引起的形状不连续,可能被怀疑有误差,通过坡度上每个点,应用坡度逼近或改变量来计算,考虑坡度变化的相对值,并以这些相对值计算一个统计值为判断该点合法性的阈值,使计算结果更为可靠。  相似文献